Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 07.08.2026
Report code: 1786083147
Hettich EBA 200 Centrifuge Analysis Report
Device Identification and Brand Model Information
The images show one laboratory centrifuge and its accessories. The label on the device clearly states the brand and model information as “Hettich EBA 200”.
Authenticity Assessment
Upon examining the Hettich logo on the device, the print quality of the labels, and the general craftsmanship details, it is understood that the product is original. The “Made in Germany” statement on the label also supports this.
Usage Areas
The Hettich EBA 200 is a compact laboratory centrifuge designed for small-volume samples. It is particularly suitable for use in clinical chemistry applications, medical facilities, laboratories, and daily routines for the separation of standard samples such as blood and urine tubes. The device can be used for centrifuging substances or mixtures of substances with a density of up to 1.2 kg/dm³.
Quantity Information
- Centrifuge Device: 1 unit
- Tube Adapter: 8 units (7 white, 1 orange)
General Condition and Physical Deformation
The general condition of the device appears to be good. No significant scratches, dents, or cracks have been detected on its white outer casing. There is slight dust and dirt on the surface. No color fading has been observed.
Mechanical and Electronic Components
The lid of the device opens and closes without any issues. The internal rotor assembly appears clean and orderly. The physical condition of the buttons on the control panel is good, and there are no signs of wear or damage. The display is seen to be in working condition and shows information clearly.
Accessories
There are 8 tube adapters included with the device. These adapters are located inside the rotor. No external cables or other accessories belonging to the device are visible in the images. There is no socket input on the front panel of the device.
Battery Status
No internal or external battery belonging to the device has been detected in the images.
Label Information
- Brand: Hettich
- Model: EBA 200
- REF Code: 1800
- SN (Serial Number): 0037723-06
- Place of Production: Made in Germany
- Production Date: 2022-10-20
- Voltage: 200-240 V~
- Current: 0.5 A
- Frequency: 50-60 Hz
- Maximum Speed: 6000 rpm
- E kin: 750 Nm
- Maximum Density: 1.2 kg/dm³
- Manufacturer Address: Andreas Hettich GmbH & Co. KG, Föhrenstr. 12, 78532 Tuttlingen, GERMANY
REF Code (Reference Code): A manufacturer-specific code that identifies a specific configuration or version of the product. This code ensures that the product is correctly identified and ordered.
SN (Serial Number): A unique identifier for each device. It is used for product tracking, warranty processes, and service history.
Place of Production: Indicates the country where the device was manufactured. In this case, it was manufactured in Germany.
Production Date: Shows the date the device was manufactured. This information provides an idea about the age and potential service life of the product.
Voltage and Current: These are the electrical supply values required for the device to operate. It indicates that it operates with 200-240 Volts alternating current and 0.5 Amperes of current.
Frequency: Specifies the electrical grid frequency range at which the device can operate (50-60 Hz).
Maximum Speed: Expresses the highest rotational speed the centrifuge can reach in revolutions per minute (rpm). For this device, it is 6000 rpm.
E kin (Kinetic Energy): Specifies the maximum kinetic energy of the device’s rotor.
Maximum Density: Shows the maximum density of the samples that can be centrifuged. This device can process samples with a density of up to 1.2 kg/dm³.
Manufacturer Address: The contact address of the device’s manufacturer.
Display Analysis
The device’s display is on and readable. In the upper left corner of the display, there is an indicator showing that it is possible to switch between “RCF” and “RPM” modes. The value “2500” appears in large font in the center. This value represents the set rotational speed (RPM) or relative centrifugal force (RCF) of the centrifuge. On the right side, there is the “t/min:s” indicator and the value “12:00” below it. This shows the set operating time of the centrifuge (12 minutes 00 seconds). Below the display, there are control buttons such as “RCF”, “START PULSE”, “SELECT”, and “STOP OPEN”.
Dimensions and Compatibility
There is no direct information regarding the physical dimensions of the device in the images. However, given the general appearance of the device and its position in the laboratory centrifuge category, it is understood to be a compact model suitable for benchtop use. The integrated 8-slot fixed-angle rotor is suitable for standard blood and urine tubes up to 15 ml.
Year of Production
The production date is clearly stated as “2022-10-20” on the label on the device. According to this information, the production year of the device is 2022.
Documents
No documents such as invoices, warranty certificates, or user manuals belonging to the device are visible in the images.
Usage Duration
There is no information regarding the total operating hours or usage duration on the device’s display, label, or any document in the images.
Existing Faults
No clear evidence such as broken parts, error messages, severed cables, or missing components that would prevent the device from operating has been detected in the images.
Potential Fault Risk
The general condition of the device is good. No concrete details indicating a potential fault risk, such as severe wear, rust, or cable crushing, have been observed in the images.
