Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 26.06.2026
Report code: 1782482776
PICKER PQS Computed Tomography Device and Accessories Analysis Report
Device and Product Identification
The images show one PICKER PQS brand Computed Tomography (CT) device, a control console (computer and monitor) understood to belong to this device, and one AGFA DRYSTAR 3000 brand medical imaging printer. The main CT device features a large circular opening (gantry) and is the primary unit used for medical imaging. While the control console is used to provide operational control of the CT device, the AGFA DRYSTAR 3000 printer is designed for printing the obtained medical images onto film.
Brand and Model Information
- Main Device Brand-Model: PICKER PQS
- Film Printer Brand-Model: AGFA DRYSTAR 3000
Authenticity Assessment
The logos, labels, and general manufacturing quality on the devices indicate that the products are original. The label on the side of the PICKER PQS device includes international certification marks such as CE 0197, GS, and ETL, as well as an FDA compliance statement. This confirms that the device was manufactured in accordance with specific quality and safety standards.
Usage Areas
The PICKER PQS Computed Tomography device is used to obtain detailed cross-sectional images of the human body. These images are of vital importance for the diagnosis, treatment planning, and follow-up of diseases in many medical branches such as radiology, oncology, neurology, emergency medicine, and orthopedics. The AGFA DRYSTAR 3000 film printer enables the printing of digital images obtained from the CT device onto high-quality medical films. In this way, physical imaging materials are created for doctors and patients.
Quantity Information
- PICKER PQS Computed Tomography Device: 1 unit
- Control Console (Computer and Monitor): 1 set
- AGFA DRYSTAR 3000 Film Printer: 1 unit
General Condition and Physical Deformation
The devices are in used condition and have been secured inside a container for transport. There is a noticeable break or crack on the front lower panel of the PICKER PQS CT device. Dirt and slight signs of wear are observed on the general surfaces of the device. The control console and film printer are wrapped in stretch film and bubble wrap to protect them during transport; therefore, a detailed physical deformation assessment cannot be performed.
Mechanical and Electronic Component Inspection
There are no obvious mechanical issues visible from the outside on the gantry part and control panels of the main CT device, although the damage to the front lower panel is noteworthy. Since the control console and film printer are wrapped, no detailed comments can be made regarding their mechanical components. The internal parts of the electronic components are not visible in the images. The buttons and indicators on the control panels are present, but information regarding their status cannot be obtained as the screens are off or covered.
Accessories
The device comes with a control console (monitor and computer unit) and an AGFA DRYSTAR 3000 film printer. No distinct cables or socket inputs are clearly visible in the images. There is no label containing expiration date information on the accessories.
Battery Status
No internal or external battery belonging to the device is visible in the images. Therefore, no comment can be made regarding the battery status.
Label Information
The label on the side of the PICKER PQS device contains the following information:
- Serial Number: 1719302. This is the unique identification number assigned to the device since production. It is used for device tracking, service history, and inventory management.
- Model Number (TYPE/MODEL NO.): 73-26. Defines the specific model of the device. This information is important for obtaining the correct spare parts and technical support.
- Voltage (VOLTAGE): 480 V. Specifies the electrical voltage required for the device to operate. Being powered at the correct voltage is critical for the safe and efficient operation of the device.
- Frequency (FREQUENCY): 60 Hz. Indicates the electrical grid frequency required for the device to operate.
- Current (CURRENT): 100 A. Refers to the electrical current drawn by the device under normal operating conditions.
- Power (POWER): 48 kVA. Specifies the maximum power consumption of the device. This information is used to evaluate the adequacy of the electrical infrastructure.
- Certifications: CE 0197, GS, ETL. These marks indicate that the product complies with European Union (CE), German (GS), and North American (ETL) safety, health, and environmental protection standards. CE 0197 indicates that the device has been evaluated by a specific notified body.
- FDA Compliance: “COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS 21 CFR SUBCHAPTER J.” This statement indicates that the device complies with the United States Food and Drug Administration’s radiation performance standards (21 CFR Subchapter J).
Screen Analysis
It is estimated that there are small screens on the control panels of the main CT device, but these screens are off or not clearly readable in the images. Since the monitor of the control console and the screen of the film printer are wrapped for transport, the text, warnings, or menus on them cannot be analyzed.
Dimensions and Compatibility
There is no numerical information in the images regarding the specific dimensions, size, or user compatibility of the product. However, the gantry opening of the PICKER PQS CT device appears wide enough for a standard adult patient to pass through. This suggests that the device is suitable for general medical imaging applications.
Year of Manufacture
There is no direct information regarding the year of manufacture on the labels or in the images. The general design, physical condition, and the “PICKER INTERNATIONAL, INC.” information on the label suggest that the device is an older generation medical imaging device. This allows for an interpretation that the device may belong to the late 1990s or early 2000s. However, this is an estimate based on visual cues; a precise year of manufacture has not been determined.
Documents
No invoices, warranty certificates, user manuals, or other documents belonging to the device are visible in the images. Therefore, no information can be provided regarding document content that would benefit the buyer.
Usage Duration
There is no information regarding operating hours or total usage duration on the device’s screen, label, or any document. This is important data and could not be determined from the images.
Existing Fault
There is a noticeable break or crack on the front lower panel of the PICKER PQS Computed Tomography device. This clearly indicates that there is physical damage to the device.
Potential Fault Risk
The crack on the front lower panel of the main CT device may affect the structural integrity of the device and carries potential fault risks for future use. Furthermore, the dirt and signs of wear on the general surfaces of the device may indicate a lack of regular maintenance, which has the potential to lead to performance issues in the long term.
