Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 15.12.2025
FUJIFILM FCR IP Cassette Type CC Analysis Report
Brand and Model Identification
As a result of detailed visual inspection, the displayed products have been identified as radiography cassettes used in the medical imaging sector. Upon examining the logos and texts on the green/turquoise strip on the upper part of the products, the brand has been definitively determined as FUJIFILM. The product model designation is clearly legible as FCR IP CASSETTE Type CC on the same strip.
Product Dimensions and Size Information
The product dimensions are stated as 24 x 30 cm on both the upper label section and the white label area on the lower part of the cassettes. This size is one of the standard cassette dimensions frequently used in radiology.
Device Identification and Areas of Use
The products in the visual are Imaging Plate (IP) cassettes used in Computed Radiography (CR) systems. These cassettes are used for the following purposes:
- To capture and store X-ray images during patient radiography.
- To be read by FCR (Fuji Computed Radiography) scanner devices and converted into digital images.
- To be used as part of a digital workflow in radiology, orthopedics, and general medical imaging departments, replacing analog films.
Quantity Information
The products in the visual are stacked and arranged side by side. When visible surfaces and edges are counted:
- In the upper left stack: Approximately 5 units
- In the upper right stack: Approximately 4 units
- On top (separate): 1 unit
- In the bottom row (separate): 2 units
According to this count, a total of at least 12 units of cassettes have been identified in the visual.
Originality Status
The label prints on the products, logo placements, fonts used, and the characteristic “Type CC” color scheme of the cassettes (turquoise upper band, grey body) fully align with original FUJIFILM industrial production standards. Visually, there is no indication of them being counterfeit or replica.
General Condition and Physical State
The general condition of the products has been assessed as used (second-hand). Physical inspection details are as follows:
- Surface Abrasions: Intense friction marks and color changes are visible on the grey body parts of the cassettes, especially in the central areas. This indicates that the cassettes have been frequently inserted into and removed from devices and often slid across tables/benches.
- Labels: Labels containing dimension information (24x30cm) are present in their places, but some may have lifted edges or slight wear.
- Color Discoloration: Dirt or darkening due to time is present on the grey plastic surfaces, more notably on the cassette in the lower right corner.
Mechanical and Structural Assessment
No major cracks, fractures, or fragmentation that would impede functional use have been detected in the product casings in the visual. The corners and edge profiles of the cassettes maintain their integrity. As for mechanical components, latch mechanisms that allow the cassette to open and close, and barcode windows are visible. However, the condition of the internal phosphor plates (whether scratched or not) cannot be seen from the outside.
Label and Barcode Information
In light of the data obtained from the visuals, the following details have been noted:
- Brand: FUJIFILM
- Series/Technology: FCR (Fuji Computed Radiography)
- Model Type: Type CC
- Dimensions: 24 x 30 cm
- Barcode: Barcode numbers belonging to the cassettes are located in the windows on the upper part (e.g., a partially readable barcode area is present on the cassette in the lower right).
Potential Failure Risk and Conclusion
Although the products appear sturdy in terms of their external casing, significant cosmetic wear (scratches and abrasions) is present. The most critical component in this type of product is the “Imaging Plate” inside the cassette. Since the wear on the outer casing indicates extensive use of the product, the possibility of scratches on the internal plates that could create artifacts (image defects) should be taken into consideration. Furthermore, the locking mechanisms and hinges must be in working order. Visual analysis confirms that the products are no longer in active use and have a history of intensive operation.
