Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 13.10.2025
Fukuda Denshi Cardimax FX-121 ECG Device Analysis Report
Product Description and Contents
The images show an electrocardiography (ECG) device, understood to be for medical use, along with various accessories belonging to it. The product set consists of the main ECG unit, patient connection cables, different types of electrodes (clip and suction), a power cable, and a roll of ECG paper. This device is used to measure and record the heart’s electrical activity.
- Quantity Information: The set includes a total of 1 main device, 1 patient cable set, 1 power cable, 4 clip electrodes, 6 suction electrodes, and 1 roll of ECG paper.
Brand and Model Identification
During detailed examination, the Fukuda Denshi brand and Cardimax FX-121 model name are clearly visible on the front panel of the device. Additionally, the CP-100J model code and manufacturer’s logo are present on the patient cable’s connection unit. This information confirms the product’s brand as Fukuda Denshi and its model as Cardimax FX-121.
General Condition and Assessment
The general condition of the device is assessed as used. There is noticeable yellowing on the device’s plastic casing, which may have occurred due to age or environmental factors. This condition suggests that the product is an older model. However, generally speaking, no significant damage or broken parts that would compromise the device’s integrity are observed.
Physical and Mechanical Analysis
Inspections carried out on the device’s physical and mechanical components are summarized below:
- Casing: Apart from widespread discoloration (yellowing) on the device’s beige plastic casing, no serious cracks, dents, or breakages have been detected. There is light dirt and dust on the surface of the casing.
- Keypad and Control Panel: The control buttons on the front panel are physically intact, and no breaks or missing parts are observed.
- Paper Tray: Some paper is visible protruding from the printer section, which indicates the mechanism is in place. However, the functionality of the mechanism cannot be commented upon based on the visual.
- Carrying Handle: The device’s integrated carrying handle appears sturdy and functional.
Accessories and Complementary Parts
Accessories belonging to the product are present in the image. The condition of the accessories is as follows:
- Patient Cable (CP-100J): The cable set generally appears to be in good condition, although the cables are somewhat tangled. No visible peeling or crushing of the cable insulation is present.
- Electrodes: The set includes 4 green clip-type electrodes and 6 suction-type (bulb) electrodes with rubber caps. The rubber parts of the suction electrodes may be worn due to use.
- Power Cable: A standard power cable is present and is in good physical condition.
- ECG Paper: One roll of ECG paper is included as an accessory.
Label and Code Information
Information readable from the labels on the device or accessories in the images is as follows:
- Brand: Fukuda Denshi
- Device Model: Cardimax FX-121
- Cable Model: CP-100J
The resolution of the images does not allow for reading other detailed label information such as serial number, lot number, or REF code.
Potential Risk Assessment
There are no visible defects or broken parts on the device. However, the yellowing of the plastic casing, attributed to the product’s age, suggests that the material may have become brittle over time. The cables, and especially the rubber electrodes, have the potential for performance degradation due to prolonged use. While the general condition of the device indicates it might be functional, calibration and a technical check would be beneficial before any use.
