Secondhand Fisher-Paykel MyAirvo 2 High Flow Device

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 25.08.2025

Fisher & Paykel Airvo 2 Humidified Respiratory Device Analysis Report

Device Description and Area of Use

The images show a Fisher & Paykel brand Airvo 2 model humidified high-flow respiratory support device and its specially designed mobile stand. This device is used to provide a heated and humidified air or oxygen mixture to patients experiencing respiratory distress. The device is seen mounted on a wheeled and adjustable stand, indicating its ease of mobile use.

Item Count

The following parts have been identified in the images:

• 1 Fisher & Paykel Airvo 2 main unit
• 1 Fisher & Paykel branded wheeled mobile stand
• 1 heated breathing circuit (hose)
• 1 power cable
• 1 water chamber (installed inside the device)

Overall Condition

The device generally appears clean and well-maintained. Although it appears to have been used, no significant wear or damage has been observed on it. Both the main unit and the stand appear to be in a well-kept condition.

Physical and Mechanical Assessment

Upon inspection of the outer surfaces of the device and stand, no significant physical deformations such as prominent scratches, cracks, dents, or discoloration have been detected. The wheels of the mobile stand appear sturdy and functional. No visible defects have been found in the mechanisms connecting the device to the stand and adjusting the stand’s height. The breathing hose connected to the device also has a robust structure.

Electronic Components and Accessories

The device’s power cable is present, and there is no visible crushing or wear. As the device is in an off state, no comment can be made regarding the screen’s functionality, but no cracks or fractures are visible on the screen surface. The water chamber is correctly placed in the designated section of the device. No missing main parts are noticeable in the images.

Label Information

Labels are noticed on the device’s body; however, due to the resolution and viewing angle of the images, specific information such as serial number, REF code, and manufacturing date on these labels cannot be read.

Potential Failure Risk

Based on the inspections carried out in the images, there is no obvious evidence (such as rust, open cuts on cables, broken parts) indicating an immediate risk of failure in the device. The product’s generally clean and orderly appearance suggests that it has been properly maintained, and this indicates a low potential failure risk.