Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 13.03.2026
Report code: 1773403058
Fisher & Paykel Airvo 2 High-Flow Oxygen Therapy Device Analysis Report
Device Identification and Brand Model Information
The product in the images is a high-flow heater and humidifier system used to provide respiratory support. Based on the inscriptions on the device’s top panel, the brand and model information has been definitively identified.
- Brand: Fisher & Paykel
- Model: Airvo 2
Originality and General Condition
Upon examining the logo prints on the device, the quality of the plastic casing, the workmanship at the joints of the parts, and the compatibility of the accessories, the product is assessed to be original. The device is in used condition, but its general condition is good. Water droplets (condensation) are visible inside the transparent water chamber, indicating that the device has been recently used or is currently active.
Areas of Use
This device is used to deliver heated and humidified respiratory gases at a high flow rate to patients with spontaneous breathing. It is suitable for use in hospital environments, such as intensive care units and wards, and, when deemed appropriate, for patients requiring respiratory support in home care settings.
Physical and Mechanical Assessment
No significant cracks, fractures, dents, or deep scratches have been observed on the device’s outer casing. There is no discoloration on the white and blue plastic surfaces. The wheeled transport stand on which the device rests appears sturdy, and no physical damage has been detected on its wheels. The water chamber is securely seated in its slot, and no mechanical issues are observed at the hose connection points.
Electronic Components and Screen
The control buttons and digital screen located on the device’s top panel are physically intact. There are no cracks or fractures on the screen. However, due to the angle and light reflection in the images, the text, warnings, or menu contents on the screen are unreadable. No externally visible crushing, peeling, or breakage has been observed on the black power cable connected to the device.
Accessory and Parts List
The hardware and accessories identified in the images are listed below. No main part appears to be missing.
- 1 Unit Fisher & Paykel Airvo 2 main device
- 1 Unit Wheeled transport stand with Fisher & Paykel logo
- 1 Unit Transparent plastic water chamber
- 1 Unit Heated breathing circuit (main corrugated hose with blue connection point)
- 1 Unit Water bag (hanging on the upper part of the stand)
- 1 Unit Thin transparent hose set for liquid transfer from the water bag to the device
- 1 Unit Black power cable
Labels and Technical Information
The inscriptions Fisher & Paykel HEALTHCARE and AIRVO 2 are clearly readable on the upper part of the device. The brand logo is also present on the lower leg of the transport stand. Due to the angle of the images, specific label information such as serial number, REF code, lot number, or manufacturing year, which might be located on the back or bottom of the device, could not be identified.
Potential Malfunction Risk
No clear malfunction, broken part, or error message that would impede the device’s operation has been identified in the images. The device’s general condition is good. The only observed physical risk factor is the possibility of the thin hoses for fluid transfer and the main breathing circuit bending, crushing, or snagging during use or transport. Other than this, there is no significant wear or rust on the device.
