Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 15.07.2025
JYM JSB-1200 Infusion Pump Analysis Report
General Overview and Product Description
This report contains the analysis of a medical device from the provided images. The product in the image is an infusion pump used in medical settings to deliver fluids (such as medications, nutrients, etc.) to patients in controlled amounts over a specific period.
- Brand: JYM
- Model: JSB-1200
- Quantity Information: The images show a total of 2 items: 1 infusion pump and 1 power cord attached to the device.
Physical State and Condition Analysis
The device is in a used but generally good and clean condition. No significant discoloration or yellowing is observed on its white casing. No major physical deformations such as deep scratches, dents, cracks, or fractures were detected on the casing, screen, or other parts of the device. The buttons on the front panel, the pump mechanism cover, and the pole clamp on the rear appear to be intact.
Accessories and Connection Ports
The device is seen with one attached black power cord. No cuts, crushing, or wear have been identified in the cord’s insulation. The following ports are located on the rear panel of the device:
- One power input jack where the power cord is connected.
- One serial (DB9 type) communication port, protected by a transparent plastic cover.
Technical Information and Label Data
The following information is clearly legible on the product label located on the back of the device:
- Model: JSB-1200
- Serial No: 1
- Power Requirement: 100-240V~50/60Hz 25VA
- Production Date: 2021-11-24
- Other Information: The label also includes standard symbols such as the CE conformity mark and an IPX4 (protection against splashing water) rating.
Screen Analysis and Operational Status
The images show that the device is powered on and its blue-backlit LCD screen is active. The screen confirms that the device is operational and displays various parameters. The information read from the screen in Turkish is as follows:
- Mode (Mod): VOLUMETRIK
- Door Status (Kapak Durumu): OPEN (AÇIK) (This notification is consistent with the pump’s door being physically open in the image and is a status update, not an error.)
- Infusion Rate (RATE ml/sa): 500
- Target Volume (HED. HAC): 250ml
- Time (Saat): 13:02
Additionally, a battery icon on the screen indicates that the device has an internal battery and is currently charging while plugged in.
Potential Risk Assessment
Based on the visual inspection, the physical condition of the device is quite good. No significant and obvious risk factors that could lead to an imminent failure, such as worn cables, cracked plastic components, or rusted metal parts, have been observed. The overall condition of the device suggests it has been carefully used. It should be noted that this assessment is a forecast based solely on visual evidence and the device has not undergone a full functional test.
