Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 01.05.2026
Report code: 1777617399
OpStar MI 20 Infusion Pump Analysis Report
Device Identification and Brand/Model Information
The device in the image is an infusion pump used for medical purposes. Upon examination of the front surface, the brand is clearly identified as OpStar and the model as MI 20. This information is clearly visible on the labels on the device.
Usage Areas and Purpose
This device enables the administration of liquid medications, nutrients, or other medical solutions to patients intravenously at a precise and controlled rate over a specific period. It is suitable for use in various hospital departments such as intensive care units, wards, operating rooms, and emergency departments. The schematic drawings on the device confirm this intended use by illustrating the IV set and patient connection.
General Condition and Physical Assessment
The general condition of the device appears to be used. There is slight soiling and dust on the outer casing, particularly on the top and side surfaces. Slight discoloration that has occurred over time is observed on the plastic components. However, no serious physical damage such as breaks, cracks, or deep dents has been detected on the casing. The condition of the device is normal, consistent with its age and usage.
Mechanical and Electronic Component Analysis
The keypad on the front panel of the device (Start/Stop, +, -, OK, Mode, BOL, Alarm Silence, Power) appears intact, and the symbols on them are legible. The mechanical door latch in the bottom right corner is in place and has no visible damage. The screen on the left side of the device is off; therefore, it cannot be determined from the image whether the screen is functional or if it has any scratches. To the left of the screen, there are LED indicators showing power and battery status. The internal electronic components or rear panel connections of the device are not visible in the image.
Accessories and Battery Status
Only the main unit of the infusion pump is visible in the image. The power cable, IV set, or other accessories required for the operation of the device are not present in the picture. The battery icon on the front panel indicates that it has an internal battery. However, since the device is turned off, there is no visual information regarding the battery’s charge level, capacity, or physical condition (swelling, leakage, etc.).
Label and Technical Information
The following information is present on the front surface of the device:
- Brand: OpStar
- Model: MI 20
- Device Type: Infusion pump
The main label containing more detailed technical information such as the serial number, lot number, production year, or REF code is not visible in the image. This information is likely located on the back or bottom surface of the device.
Fault and Risk Assessment
There is no clear evidence in the images, such as broken parts or error messages, indicating that the device is faulty. Apart from slight soiling and wear on the outer casing, no serious corrosion, cable damage, or mechanical failure indicating operational risk has been observed. The general physical condition of the device is good.
