Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 20.02.2026
PlusMED IP-8000 Volumetric Infusion Pump Analysis Report
Device Identification and Product Description
The device in the examined visual is medical equipment used for patients in the medical field. Based on visual evidence, the device has been identified as a volumetric infusion pump, which enables the controlled and precise administration of liquid medications, nutrients, or blood products into the patient’s circulatory system. The device’s design features a typical infusion device architecture, including a carrying handle, control panel, digital screen, and set loading compartment. It has a vertical form factor.
Brand and Model Information
The brand and model information has been definitively determined based on the text on the front panel of the product. The phrase “plusMED IP-8000” located in the upper right section of the device confirms that the product belongs to the plusMED brand and is the IP-8000 model. Directly below the model name, the phrase “Volümetrik İnfüzyon Pompası” (Volumetric Infusion Pump), specifying the device type, is clearly legible. There is no ambiguity based on estimation or assumption.
General Condition and Cosmetic Examination
The device in the visual appears to be second-hand. The product’s outer casing is cream/white in color, and there are slight signs of yellowing on the plastic parts due to age or use. On the front surface of the device, the blue label overlay shows minor scratches, scuff marks, and dulling, particularly on its left wing, which reads “sıvı akışı” (liquid flow), and in the lower parts of the screen. However, no deep cracks, breaks, or severe deformation compromising the integrity of the casing were detected in the visual.
Control Panel and Interface Details
The front face of the device features an LCD screen and a physical membrane keypad below it. The Turkish text on the keys indicates that the device was manufactured for the Turkish market or has been localized. The following functions can be read on the keypad:
- Up and Down arrow keys
- Enter
- Stop (Yellow key)
- Set
- Start (Green key)
- Delete
- Select
- Function key with a pink/red icon (possibly Bolus or mute)
No excessive wear is observed on the keys, and their readability has been preserved. Since the LCD screen was off at the time of examination, no comments can be made regarding pixel status or screen brightness.
Label and Maintenance Information
On the upper part of the device, just in front of the carrying handle, there is a round service label. The label features the “ATLAS BIOMEDICAL” logo and company name. Additionally, the phrase “Bu Cihazın Periyodik Bakımları Şirketimiz Tarafından Yapılmaktadır” (The Periodic Maintenance of This Device is Performed by Our Company) is legible on the label. This label indicates that the device has been used in a professional medical environment and has undergone technical service tracking in the past.
Areas of Use
The plusMED IP-8000 is suitable for use in hospitals, clinics, intensive care units, and home care services. It is used to deliver medications, serums, or nutritional solutions (TPN) that require precise intravenous dosage to the patient at a specific duration and rate. It operates with an IV set (infusion set).
Mechanical and Physical Components
On the left side of the device, there is a set loading cover mechanism indicated by the text “sıvı akışı” (liquid flow) and a downward-pointing arrow. An integrated, sturdy plastic carrying handle is located on the top, indicating the device’s suitability for mobility (e.g., hanging on an IV pole or transport). No IV set (infusion tubing) or power cable is attached in the visual; only the main unit is visible.
Quantity Information
The report has been prepared for 1 unit of the main device, which is the focal point of the visual and whose details are clearly discernible. Although parts of similar devices (green/white casings) are visible at the far right and left edges of the visual, they have been excluded from the scope of this report and not included in the quantity as they are not fully depicted.
Potential Condition and Risk Assessment
The device maintains its cosmetic integrity, but its electronic functionality cannot be confirmed visually due to the screen being off and the power connection not being visible. As battery life in second-hand medical devices can decrease over time, the condition of the device’s internal battery is a potential point of inspection. Aside from minor surface scratches on the front panel, there is no visible physical damage that would impede the device’s operation. The presence of the maintenance label is a positive indication that the device has not been left unchecked.
