Secondhand Medtronic Minimed 780G Insulin Pump

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 03.01.2026

Detailed Analysis Report of Medtronic MiniMed Insulin Pump

Device Identification, Brand and Model

The product in the image is an insulin pump, an advanced medical device used in diabetes management. The device’s characteristic keypad layout (directional buttons, central selection button, left back button, and right menu button), its glossy black casing, the reservoir cap protrusion located in the upper left corner, and especially the screen interface design have been examined in detail. The blue shield icon on the screen and the general interface layout strongly indicate, with visual evidence, that the device belongs to the Medtronic MiniMed 780G system. However, since the model number is not directly legible on the front of the device, it has been identified as a “Medtronic MiniMed Series” device. The blood glucose measurement unit being mmol/l on the screen indicates that the device is configured for regions (Europe, etc.) that use this unit.

Originality Status

The craftsmanship quality of the product’s casing, the brightness and resolution of the screen, the design of the interface icons (battery, reservoir, antenna signal), and the presence of the proprietary “SmartGuard” shield interface specific to Medtronic devices confirm that the product is an original Medtronic manufactured device. No signs of replication or imitation are observed.

Areas of Use and Purposes

This device is used to manage blood sugar levels and provide continuous insulin infusion for individuals with Type 1 diabetes. Communicating with an integrated glucose sensor (as indicated by the antenna icon on the screen), it is a vital medical device capable of automatically adjusting insulin dosage based on the patient’s blood sugar value or delivering doses under user control. The unit in the image is the main pump mechanism; it requires consumables such as an infusion set and a reservoir for use.

Screen Analysis and Interface Data

The device is in operating condition and its color screen is active. The instantaneous screen data in the image is as follows:

• Blood Glucose Value: The value of 12.5 mmol/l is displayed within the blue shield in the center of the screen. This value represents the instantaneous sensor glucose level.
• Automatic Mode (SmartGuard): The blue shield icon indicates that the device’s SmartGuard (automatic insulin adjustment) feature is active and functioning.
• Active Insulin (ActIns): The text 5.4 E ActIns in the lower right corner indicates that 5.4 units of insulin are currently active in the body.
• Time: The local time 13:15 is displayed in the upper right corner.
• Top Status Bar Icons:
  • Battery Status: The green vertical battery icon on the far left indicates that the battery is sufficiently charged (approximately 75%).
  • Reservoir Status: The yellow icon next to the battery represents the insulin reservoir level. Its yellow color and low fill level suggest a warning that insulin is running low.
  • Sensor Connection: The green antenna icon indicates that the device is communicating successfully with the glucose sensor.
  • Silent Mode: The bell icon with a red cross over it indicates that the device’s audible alerts are turned off (in vibrate or completely silent mode).

General Condition, Cosmetic and Physical Examination

The device is generally in used condition. Findings regarding its physical state are as follows:

• Casing: Fingerprints, smudges, and a noticeable amount of surface dust are observed on the glossy black surface. Although slight signs of use, caused by light reflection, are visible on the left and bottom edges of the casing, no deep cracks or fractures have been detected.
• Screen Surface: Fine scratches and dust particles are present on the screen surface or its protective layer. A faint vertical mark or smudge is visible on the left side.
• Mechanical Components: The keypad (directional arrows, central button, menu, and back buttons) appears to be in place and robust. The white print on the buttons is not worn off and is clear.
• Battery Cover/Reservoir Area: The reservoir cap in the upper left corner of the device appears to be securely closed. There is no physical deformation.

Battery Status

The device operates with a standard cylindrical battery (usually AA). The green battery indicator on the screen shows that the current battery voltage is sufficient to operate the device without issues and that it has approximately 75% capacity.

Current Malfunction and Potential Risk Analysis

There is no indication in the images that the device has entered “Error” mode. The screen data shows that the device is performing its normal functions.

• Current Status: The device is active, the screen is intact, and pixels are functioning without errors. The sensor connection is active.
• Risk/Warning: The yellow “Reservoir” icon at the top indicates that insulin is running low; this is not a malfunction but a standard condition requiring user intervention (reservoir change). The red mute icon warns the user that alarms might not be audible.
• Potential Malfunction Risk: Apart from dust on the casing, no visible crushing, rust, or liquid contact marks are found on cables or input ports, thus no short-term mechanical malfunction risk is visually anticipated.

Quantity Information

Only 1 unit of the main device (insulin pump) is present in the image. Accessories such as a reservoir, infusion set tubing, blood glucose sensor, or box/documentation are not visible in the image.