Secondhand Siemens Magnetom Essenza MRI Machine

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 15.01.2026

SIEMENS MAGNETOM ESSENZA MR Imaging Device Analysis Report

Device Identification, Brand and Model

The product in the image is a Magnetic Resonance Imaging (MR/MRI) device used for medical imaging purposes. The device consists of the main unit (gantry) where imaging is performed and the patient table where the patient lies.

• Brand: SIEMENS
• Model: MAGNETOM ESSENZA

Brand and model information has been clearly identified by the inscriptions located on the upper left and middle parts of the device’s circular main unit, known as the “gantry”. The logo and typography perfectly match the manufacturer’s original design language.

General Condition and Originality

The image was taken from a viewing window outside the room where the device is located (presumably an RF-shielded room); therefore, the image contains the texture of a window mesh. However, the device visible behind this obstruction maintains its cosmetic and structural integrity. The general condition of the device can be evaluated as “used but clean and in good condition”. Upon examining the casing structure, labeling points, and design details, the product is understood to be Original.

Areas of Use

This device is an advanced technology medical diagnostic instrument used in radiology units and hospitals for detailed imaging of internal organs, soft tissues, the brain, spine, and joints. It enables the acquisition of internal body images using a magnetic field through a non-invasive method.

Physical Deformation and Cosmetic Examination

The physical inspections based on visual analysis have led to the following conclusions:

• Outer Casing (Gantry): No visibly large cracks, dents, or discoloration have been detected on the main body of the device. The white/gray color tones, which are standard for Siemens devices, have been preserved.
• Patient Table: The patient bed (table) is positioned to allow entry into and exit from the gantry. No tears or breaks are discernible in the upholstery or plastic components of the bed from the photograph.
• Surface Cleanliness: The overall appearance of the device is clean; no signs of heavy dirt or rust have been observed.

Mechanical and Electronic Component Analysis

The condition of the device’s externally observable components is as follows:

• Mechanical Movement: The patient table and rail system appear stable in the image. No tilting or displacement of the mechanism has been observed.
• Electronic Panels: On the front left side of the gantry unit, there are control buttons and a small information screen. Since the screen appears off or dark at the moment of the visual, content analysis could not be performed, but its physical integrity is complete.
• Cabling: A bundle of cables is visible at the foot end of the patient table. The wrapped and untangled nature of these cables suggests that the device is in active use or standby mode rather than being in an out-of-use scrap condition.

Accessories and Components

The following components and accessories, apart from the main device, have been identified in the image:

• Quantity Information: 1 Main MR Device (Gantry + Table) and associated surface coils.
• Head/Neck Coil: On the patient table, a white cage-like special antenna (coil) accessory, known as a “Head Coil” and used for brain and neck scans, is attached.
• Side Equipment: On the shelf to the left of the image, MR-compatible sponges (positioners) or phantoms (calibration tools) are visible.

Potential Malfunction Risk and Evaluation

During the visual inspection, no clear evidence indicating a device malfunction, such as an “out of service” label, removed covers, or severe physical damage (breakage, fragmentation), was found on the device. The organized arrangement of cables and the coil being in a ready-to-use position on the table suggest that the device is active or ready to be activated. Based on visual evidence, it can be stated that the physical condition of the device is good and it does not carry any signs of a serious potential risk.