Secondhand Respirox SoundSleep LC-BPAP 30T BPAP ST Device with Humidifier

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 02.02.2026

RespiroX BPAP ST Respiratory Device Analysis Report

Device Identification

The device in the image is a medical respiratory support device with an integrated humidifier unit, used in the treatment of respiratory failure and sleep apnea. The device is shown as a single system formed by the combination of two main parts (the main control unit and the heated humidifier unit).

Brand and Model

As a result of a detailed examination of the device’s front face, the brand and model information have been clearly identified. The RespiroX brand logo is located on the main unit and the humidifier section. On the main unit’s front panel, in the upper right corner of the screen, the model name is clearly written as BPAP ST. In light of this information, the product’s brand is RespiroX, and its model is BPAP ST.

Authenticity

Upon examining the device’s case quality, the clarity of brand logo prints, the screen interface, and label placements, it is understood that the product is an original RespiroX production. There are no visual findings to suggest it is an aftermarket or counterfeit product.

Areas of Use

The RespiroX BPAP ST model operates on the principle of Bilevel Positive Airway Pressure. Thanks to its Spontaneous Timed (ST) mode, it supports the patient’s breathing and also triggers respiration if the patient does not breathe within a set timeframe. Its primary areas of use include:

• Treatment of Obstructive Sleep Apnea (OSA).
• Chronic Obstructive Pulmonary Disease (COPD).
• Neuromuscular diseases.
• Home-based non-invasive ventilation support for patients suffering from respiratory failure.

Quantity Information

Products analyzed in the image:

• 1 unit RespiroX BPAP ST Main Device (integrated with humidifier unit).
• 1 unit Power Cable (plugged into the wall socket).

General Condition

The cosmetic condition of the device appears to be excellent and clean. There is no noticeable yellowing, stains, or signs of use on the white plastic casing. Aesthetically, the device appears to be in “new” or “very lightly used” condition. It presents a well-maintained and hygienic appearance.

Physical Deformation

Upon detailed examination of the product’s casing, no breaks, cracks, dents, or scratches were detected on the body, humidifier reservoir, or control knob. The corners and joints appear to be in good order.

Mechanical Components

The water reservoir (humidifier), which is one of the device’s mechanical components and located on the right side, is perfectly seated in the main unit. The air outlet port on the top is transparent and clean. The rotary control knob on the front panel is sturdy and in place.

Electronic Components

The image shows that the device is electrically connected and operating. The LCD screen is active; there are no visible issues such as pixel loss or screen darkening. The backlight is bright and clear, indicating that the electronic circuit and power supply are functioning properly.

Screen Analysis

The following information is readable on the device’s color LCD screen:

• Date: 26/03/2024
• Time: 10:17
• Interface Icons: “Settings” gear and “Information” (i) icons are present at the bottom of the screen.
• Connection Icon: Small icons indicating SD card or connection status are located in the upper left (or as a small icon in the upper right corner).

Accessories

Accessories seen integrated with or connected to the device are:

• Power Cable: Black in color, sturdy, and plugged into the wall socket.
• Humidifier Unit: The module adjacent to the right side of the device.
• Missing Parts: The image does not show the air tubing (circuit) and mask required for patient use. The transparent air outlet port on the top of the device is empty.

Battery Status

These types of devices typically operate directly with mains electricity (AC). The device in the image is operating with a cable plugged into the wall. No distinct battery icon indicating operation with an external battery is visible on the screen; power is supplied from the outlet.

Label Information

A QR code label is located on the upper left side of the device. The readable parts on the label are as follows:

• QR Code: A barcode intended to direct to setup and usage videos or manuals.
• Text: Informational text starting with “Setup and Usage…” and ending with “Scan It”.

Year of Manufacture

Although a clear manufacturing year label is not readable on the device, the date on the screen (2024) and the device’s modern design indicate that the product is current and likely manufactured within the last 1-3 years.

Current Fault

Based on visual analysis, no fault has been detected in the device. There are no “Error”, “Service”, or red-colored warning messages visible on the screen. The device appears to be in “Standby” or “Ready” mode.

Potential Fault Risk

Based on visual data, there is no significant wear, signs of liquid contact, crushed cables, or physical damage on the device, therefore, no immediately apparent serious potential fault risk exists. The device’s condition is reassuring.