Secondhand Creative PC-3000 Patient Monitor

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 11.08.2025

Creative PC-3000 Patient Bedside Monitor Analysis Report

Device Description and Area of Use

The product shown in the images is a patient bedside monitor used for monitoring a patient’s vital signs in medical settings. Based on the icons on the front panel (blood pressure, SpO2, ECG, temperature), it is understood that it measures basic vital signs such as blood pressure, blood oxygen saturation, heart rate, and body temperature. The device has been observed as a single unit.

Brand and Model Information

The brand and model information are clearly legible on the label on the rear surface of the device. According to this information, the product’s brand is Creative and its model is PC-3000.

General Status and Condition

The product is a used device. Its overall condition can be assessed as moderate, considering the scratches and dirt on it. It is clear that the device is not new and has been used before. There is no information or visual evidence to suggest that any maintenance or repair has been performed.

Physical Assessment

Upon examination of the device’s physical condition, the following details have been identified:

• Casing: There are various instances of dirt, stains, and wear from friction on the rear section and general surface of the device’s white plastic casing. No major cracks or fractures that would compromise the integrity of the casing are visible.
• Screen: The device’s screen is in the off state. There are numerous superficial scratches on the screen surface, visible from different angles.
• Buttons and Controls: The function buttons and the rotary control knob on the front panel are physically in place and show no significant damage.
• Mechanical Components: The fan and ventilation grilles on the rear panel are visible and do not have any cracks.

Technical Label Information

The following technical information can be read from the manufacturer’s label on the rear panel of the device:

• Model: PC-3000
• Serial Number (SN): J4200LE00485
• Manufacturing Information: 2015-4 (can be interpreted as April 2015)
• Power Requirement: 100-240V AC, 50/60Hz, <60VA
• Conformity Mark: CE 0123

Battery Status

It is indicated on the rear label and in the warning texts that the device has an internal battery. Warnings such as “Burn hazard (The built-in battery)” and “To avoid battery damage always remove battery(s) before shipping or storage” confirm the presence of a battery. Since the battery compartment is closed, an assessment of the battery’s physical condition (swelling, leakage, etc.) cannot be made.

Accessories and Missing Parts

No accessories other than the device itself (power cable, SpO2 sensor, NIBP cuff, ECG cables, temperature probe, etc.) are present in the images. Therefore, it is assessed that all external accessories required for the device’s operation are missing.

Potential Risk Assessment

The scratches on the device’s screen have the potential to slightly affect image clarity when the monitor is operational. As the product was manufactured in 2015 and shows visible signs of use, it is important that all its functions and calibration are checked by a qualified technician before clinical use. No obvious defects that would prevent the device from functioning (e.g., broken port, burn marks) have been observed in the images.