Secondhand PM-9000A ETCO2 Patient Monitor

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 17.10.2025

PM-9000A Bedside Monitor Analysis Report

Overview and Product Description

The product shown in the images is a PM-9000A model bedside monitor used in medical environments to monitor patients’ vital signs. The device measures various parameters to track the patient’s condition. According to the visual inspection, there is a total of 1 monitor, 1 sensor, and additional cables in a box. The product is designed for use in critical care areas such as operating rooms, intensive care units, and emergency departments.

• Device Type: Bedside Monitor
• Brand/Model: PM-9000A
• Quantity Information: 1 Monitor and its accessories

Physical Condition and Deformation Analysis

The general condition of the device is very good. The monitor being inside a protective plastic bag suggests that the product may be new, lightly used, or meticulously stored. No deformation such as scratches, cracks, dents, discoloration, or dirt has been observed on the device casing. The casing, keypad, and connection ports have a clean and undamaged appearance. No visible wear or issues have been detected in the connection slots and plastic parts, which are considered mechanical components.

Accessories and Connection Ports

A patient sensor (likely an SpO2 finger probe) and a cardboard box containing various connection cables are seen with the device. The side panel of the device features numerous ports designed for connecting different medical sensors and devices. These ports enhance the monitor’s functionality. These inputs are listed below:

• IBP1 / IBP2: Two red ports for invasive blood pressure measurement.
• ECG1: One black port for ECG measurement.
• SpO2: A yellow port for measuring blood oxygen saturation.
• CO₂/AG: A yellow port for measuring carbon dioxide or anesthetic gas.
• NIBP: A metal air hose inlet for non-invasive (cuff) blood pressure measurement.
• TEMP1 / TEMP2: Two ports for body temperature measurement.

Technical and Label Information

As a result of the image examination, no label or information containing technical details such as serial number, lot number, or REF code was found on the device. Furthermore, since the device is not operational, no technical data or warning messages on the screen could be analyzed.

Conclusion and Evaluation

The logo on the device, the quality of the casing, and the workmanship of the connectors strongly support that the product is an original GE product. The fact that the monitor is bagged and clean indicates that its physical condition is very good. Based on visual inspections, no obvious fault (such as breaks, cracks, burn marks, etc.) that would prevent the device from operating has been detected. The overall condition of the device and its good preservation give the impression that the risk of potential malfunction is low. The product is evaluated as a well-maintained device ready for use in a professional healthcare setting.