Secondhand Esaote Mylab Seven Ultrasound Machine

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 10.02.2026

Esaote MyLabSeven Ultrasound Device Analysis Report

Device Identification, Brand, and Model Analysis

The device shown in the visuals is an advanced ultrasound system used for medical imaging, built on a mobile (wheeled) platform. As a result of detailed examinations of the product, its brand and model information have been definitively identified.

• Brand: The manufacturer is clearly identified as Esaote by the “e” logo located on the upper frame of the device’s monitor, in the upper-left part of the main control panel, and within a circle on the side body panel.
• Model: The designation MyLabSeven is readable in the area below the screen of the control panel and on the device’s model labeling. Additionally, the “eHD” logo, referring to the device’s imaging technology, is present in the lower-right corner of the monitor.
• Device Type: Console-type, wheeled, multi-disciplinary medical ultrasonography device.

General Condition and Physical State

Upon examining the external cosmetic condition of the device, it is observed that it is second-hand (used), but its overall structure is clean and well-maintained.

• Casing and Bodywork: No significant cracks, breaks, or severe impact marks were found on the device’s white and gray plastic outer body (casing). Regional slight yellowing in the color of the plastic components might have occurred due to normal use, but there is no noticeable serious color deformation.
• Monitor Condition: The device’s LCD monitor is physically sound. However, circular marks presumed to be caused by wiping and fingerprint smudges are present on the screen panel. No deep scratches or cracks were detected on the screen glass.
• Control Panel: The keypad, trackball, TGC sliders, and rotary buttons appear complete. The QWERTY keyboard unit slides out from under the panel, and the inscriptions on the keys are not worn off. The general condition of the keys appears clean.

Mechanical and Electronic Component Examination

Mechanical and electronic data obtained from the visuals are as follows:

• Articulated Arm: The articulated arm mechanism connecting the monitor to the main body appears robust. The visuals indicate that the monitor can be positioned at different angles, suggesting the mechanism is functional.
• Wheels: The device has 4 wheels at its base. The wheels’ brake mechanisms (pedals) are present, and no disintegration is observed in the rubber parts.
• Electronic Condition: Since the device is in the off position, visual analysis regarding the screen’s functionality (pixel errors, etc.) and software status cannot be performed. However, the physical interface (ports, buttons) indicates that electronic integrity is maintained.

Accessories, Cables, and Probe Information

The probes and connection points, which are the most critical components of the ultrasound device, have been examined in detail:

• Probe Connection Ports: It is estimated that there are a total of 4 or more probe input slots on the front body of the device, and 3 probes are actively seen connected in the visuals.
• Available Probes:
  • At least 2 ultrasound probes (transducers) attached to the device are identified in the visuals.
  • A flat-tipped (likely Linear) probe is visible on the left hanger.
  • On the right hanger, a probe is hanging that is assessed to be a transvaginal or endocavitary probe due to its structure.
  • The probe cables are wrapped with transparent plastic protective sleeves (gelatin) to prevent contamination or for post-sterilization protection. This situation may indicate that the device is carefully stored or being prepared for shipment.
• Cables and Power: A thick, black power cable (Power Cord) is located at the rear of the device. The cable is neatly bundled with a gray hook-and-loop strap. No crushing or breakage is observed in the cable.
• Other Accessories: A compartment designed to hold a gel bottle is present on the left side and is intact.

Originality and Label Information

The logos on the device, material quality, and design details (Esaote’s typical design language) prove that the product is 100% original.

• Rear Labels: Yellow warning labels and manufacturer labels are present on the back of the monitor. However, due to the resolution of the visuals and the shooting distance, specific texts such as Serial Number (SN) or Manufacturing Date cannot be read.

Areas of Application

The Esaote MyLabSeven is a high-end ultrasound device used in hospitals and clinics. When appropriate probes are attached, it is suitable for use in the following areas:

• Radiology (Abdominal imaging)
• Cardiology (Cardiovascular examinations – Requires a cardiac probe)
• Obstetrics and Gynecology (Obstetric and Gynecological)
• Urology
• Musculoskeletal system examinations
• Vascular (Vessel) imaging

Summary and Final Evaluation

The examined Esaote MyLabSeven ultrasound device is seen as a complete set with its probes (at least 2 visible probes) and accessories. It is cosmetically clean; the stains on the screen require superficial cleaning. The fact that the cables are sleeved and the overall tidy structure suggest that the device is in “good” condition and kept ready for use or sale. No severe damage, rust, or missing main parts have been detected.