Secondhand Mindray DC-60 Exp Ultrasound Machine

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 12.12.2025

Mindray DC-60 Exp X-Insight Diagnostic Ultrasound System Analysis Report

Device Identification, Brand and Model Analysis

The medical imaging device shown in the visuals has been examined in detail. The product is an ultrasound system integrated onto a mobile cart, featuring a dual-screen setup (main monitor and touchscreen control panel).

• Brand: Mindray
• Model: DC-60 Exp
• Product Series/Technology: The inscription X-Insight is located on the upper right monitor frame of the device. This confirms that the device belongs to the series featuring X-Insight imaging technology.
• Device Type: Diagnostic Ultrasound System.

Originality and Label Information

Upon examining the manufacturer’s label on the back of the device and the logos on its body, it has been determined that the product is an original Mindray production. Workmanship, material quality, and label fonts align with original standards.

The information identified from the factory label in Visual 4 is as follows:

• Model: DC-60 Exp
• Serial Number (SN): CN8-98000686
• Manufacturing Date: 2019-11-23
• Power Ratings: 220-240V~, 50/60Hz, 630VA
• Manufacturer: Shenzhen Mindray Bio-Medical Electronics Co., Ltd.

Additionally, the following information can be read from the label of the gel warmer accessory integrated into the device:

• Accessory: Gel Warmer
• Model: UGW-11
• Power Input: 12V / 12W

Status, Condition and Physical Examination

The general condition of the device can be evaluated as “New” or “Out of Box/Never Used”. The primary visual evidence supporting this judgment is as follows:

• Protective Coverings: Factory-applied transparent protective foils (plastic bags) are still present on the device’s bottom caster wheels and some cables. This is the strongest evidence that the device has not entered active field use or has seen very little contact immediately after installation.
• Cosmetic Condition: No yellowing, scratches, cracks, impact marks, or wear is observed on the device’s outer casing, screen, control panel knobs, and handles. The white/gray plastic components retain their original color.
• Screen and Control Panel: No breaks or dead pixels are visible on the main monitor and touchscreen (physical surface analysis, as the device is off). The trackball and keypad are perfectly clean.
• Cleanliness: No dust accumulation is observed between the keyboard keys or in the speaker grilles.

Mechanical and Electronic Hardware Analysis

The hardware features of the device have been analyzed from the visuals as follows:

• Probe Ports: The front of the device has 4 active probe input ports. The ports feature a locking mechanism.
• Available Probes (Accessories): In the visuals, 3 ultrasound probes are seen attached to the device:
  • 1 Convex Probe: Wide-headed, for abdominal ultrasonography.
  • 1 Endocavitary (Vaginal) Probe: Slender and elongated, for obstetrical and gynecological examinations.
  • 1 Linear Probe (Visually estimated to be flat-headed and non-curved, but due to its resemblance to a curved probe from a side angle, there is also a possibility that it could be a second convex or volume probe, which cannot be fully distinguished from the visual). The probe heads and cables are clean, and the strain reliefs at the cable connection points are intact.
• Thermal Printer: A medical printer is mounted in a dedicated compartment within the device’s main body.
  • Brand: MITSUBISHI
  • Model: P95
  • Condition: The printer paper output tray is clean.
• Connection Interfaces (Rear Panel): HDMI output, 4 USB ports (likely 2 of which are USB 3.0), Ethernet (Network) input, and S-Video/VGA-like video transmission ports are available.

Accessories and Documents

The documentation set provided with the device is quite comprehensive and indicates that the device has been received completely:

• User Manuals: “Operator’s Manual [Basic Volume]”, “Operator’s Manual [Advanced Volume]”, “Quick Guide”.
• Digital Media: DC-60 Series Multi-Language Operation Manual CD.
• Technical Documents: “EMC Guidance and Manufacturer’s Declaration”, Acoustic Power Data Table.
• Other Booklets: “RED Compliance Information Manual”, Gel warmer installation and usage warnings.
• Probe Holders: The device includes specialized slots for probes and one vertical endocavitary probe holder.

Areas of Use and Compatibility

The Mindray DC-60 Exp X-Insight is a mid-to-high segment ultrasound device. Considering the hardware configuration in the visuals (probe variety and X-Insight technology), it is suitable for use in the following specialties:

• Radiology: General abdominal imaging, superficial tissue examinations.
• Obstetrics and Gynecology (Gynecology/Obstetrics): Thanks to its vaginal probe and convex probe, it is fully compatible for pregnancy monitoring and gynecological examinations.
• Urology: Kidney, bladder, and prostate examinations.

Conclusion and Evaluation

Considering the presence of protective foils, cosmetic perfection, and completeness of documentation, the examined Mindray DC-60 Exp device is in new or near-new (Open Box) condition. Despite its late 2019 manufacturing date, it is likely that it has been stored or kept as a spare. With its integrated gel warmer, Mitsubishi thermal printer, and triple probe set, it is a complete package that can be installed in a clinic and used immediately. No missing parts or risk of physical defects (rust, deformation) were identified in the visuals.