Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 26.08.2026
Report code: 1787765236
Radiology Imaging System Analysis Report
Device Identification and Basic Information
The images show one stationary X-ray imaging system, a control console, and a display unit. The system consists of an X-ray tube, a patient table, a vertical column stand, and a control unit.
The product brand is identified as Carestream. The Carestream brand is visible on the software interface and the screen bezel.
The PHILIPS brand is located on the bottom bezel of the display unit.
Usage Areas and Compatibility
This system is used in the radiology departments of hospitals and clinics for skeletal, lung, and trauma imaging.
The images include a chest X-ray result and the interface screen.
Quantity Information
The images show one X-ray table, one vertical tube support column, one X-ray tube, one high-voltage transformer, one control console, one display, and two small stools.
General Status and Condition
The device is in used condition. It is positioned in a clinical environment and is in working order.
Physical Deformation
There are slight surface marks on the metal and wooden parts of the X-ray table. Minor peeling and color tone variations are visible on the painted surface of the control console. There are standard signs of use throughout the device that do not affect its functionality.
Mechanical Components
The tube movement mechanism on the vertical column, the patient table, and the buttons on the control console are in place. The mechanical components maintain their integrity.
Electronic Components
The analog gauges, adjustment knobs, and switches on the control panel are active. The display unit is transmitting images.
Accessories and Connection Ports
A coiled hand controller connected to the control console is present. A lead-lined protective barrier and a protective apron hanging on the wall are located in the room. The necessary power and signal cables are connected to the system.
Battery Status
Since the system operates directly on mains electricity, there is no internal or external battery.
Label and Text Inventory
A black radiation hazard emblem on a yellow background and the word CAUTION are located on the tube support column. This warning indicates that the device produces X-rays and that radiation safety must be observed. Various labels are present on the control panel and the screen interface.
Screen Analysis
The Carestream Image Suite software is active on the screen. The patient name appears as HATIBAĞLU, İLAYDASU on the left panel. The ID number is 44092518890, date of birth is 13.09.2012, and gender is recorded as female. The acquisition date of 24.03.2023 and time of 08:48:21 are displayed in the upper right corner. A PA chest X-ray of the patient is open in the center area.
Dimensions and Compatibility
Official dimension data for the device is not present in the images. The patient table is suitable for standard adult sizes.
Year of Manufacture
No clear year of manufacture is visible on the labels. Based on the device design and screen software, it is understood to have been produced after the 2000s.
Documents
There are no printed invoices, warranty certificates, or physical documents in the images.
Usage Duration
There is no counter information on the screen or labels indicating total operating hours or usage duration.
Existing Faults
No broken parts, error codes, disconnected cables, or missing components were detected in the images.
Potential Risk of Failure
No excessive wear or crushing was observed on the cables and connection points. The device is in good condition.
Authenticity
The logos, labels, interface software, and structural components on the system comply with original equipment standards.
