Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 21.04.2026
Report code: 1776784718
Siemens Somatom Scope Computed Tomography Device Analysis Report
Device Identification
The product in the image is a Computed Tomography (CT) scanner system used for medical imaging purposes.
Brand and Model
The Siemens brand is clearly visible on the gantry of the device, and the Somatom Scope model name is clearly legible on the right side.
Usage Areas
This device uses X-rays to create detailed cross-sectional images of the body’s internal structures. It is used in radiology departments for a wide variety of medical purposes, such as diagnostic imaging, oncological follow-up, trauma assessment, and guidance for interventional procedures.
Quantity Information
The image shows one integrated CT scanner system (gantry and patient table). Additionally, a contrast media injector arm integrated into the gantry and an IV pole in the background are visible.
General Condition and Physical Deformation
The outer casing of the device appears clean and intact. No significant cracks, fractures, or deep scratches were observed on the plastic panels. The gray mat on the surface of the patient table is positioned correctly. The overall condition of the device appears to be good.
Mechanical Components
The patient table rails and the gantry opening appear clean. The control panel buttons on the gantry are in place. The joints of the contrast injector arm appear to be sturdy. No visible issues were detected in the mechanical parts.
Electronic Components and Screen Analysis
The small screen on the upper part of the gantry is off. The lights on the control panel on the right side are not illuminated. Red warning lights are visible on the wall-mounted power panel in the background. This indicates that the device is in standby mode or powered off, but the panel is receiving power. The operational status of the device cannot be determined from the image.
Accessories
There is a contrast media injector mounting arm integrated into the device. A handle is present at the foot end of the patient table. A wheeled IV pole is visible in the background. No other external accessories or cable harnesses are present in the image.
Label Information
There is no technical data label containing the serial number, lot number, or manufacturing year clearly visible on the outer surface of the device.
Potential Failure Risk
In the visual analysis, no signs of serious wear, rust, or damage were observed on the device. The physical condition of the device is in good state.
