Secondhand SK SK-600 II Infusion Pump

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 17.10.2025

SK SK-600 II Infusion Pump Analysis Report

Overview and Device Description

The device shown in the visuals is an SK brand SK-600 II model infusion pump. This product is used in healthcare facilities to administer fluids and medications to patients intravenously in a controlled manner, over a specific duration and at a particular rate. The general structure of the device and its keypad indicate its suitability for professional medical use. One infusion pump is present in the visuals.

Condition and Status Assessment

The overall condition of the device has been assessed as used. No significant discoloration or yellowing is observed on its white plastic casing. While the surface generally appears clean, careful inspection revealed some signs of wear due to use.

• Scratches and Abrasions: Slight scuff marks and small scratches are present on the device’s casing, particularly along the edges of the screen frame. Hairline scratches are also present on the screen surface, but these scratches do not obstruct the view of the screen.
• Cracks and Fractures: No breaks, cracks, or dents have been detected on the device’s casing, carrying handle, or other areas.
• Cleanliness: The general surface of the device is clean, but slight dust accumulation may be observed in recessed areas such as between the buttons.

Mechanical and Electronic Assessment

The mechanical and electronic components of the device appear to be in good condition, as far as can be visually assessed. The carrying handle located on the upper part is robust. Control buttons on the device such as “STOP”, “SET”, “START/BOLUS”, “POWER” are physically intact and their inscriptions are legible. Electronically, the device’s screen is off. Therefore, no comment can be made regarding whether the screen is functional or if there are any pixel defects. Since there are no cable connections, no observation could be made as to whether the device is operational.

Accessories and Missing Parts

No accessories belonging to the device (such as a power cable, IV set, drip sensor) are present in the visual. Only a card explaining the button functions, attached to the carrying handle with a ribbon, is visible. No socket inputs are visible on the device. No information about whether it has an internal battery or the battery’s condition can be gathered from the visual.

Label and Code Information

No technical label or stamp containing information such as serial number, lot number, reference code (REF), or year of manufacture is visible on the device.

Potential Risk Assessment

Based on the examination of the visuals, no findings indicating a potential risk of malfunction such as serious physical damage, rust, cable deformation, or fluid leakage were encountered on the device. The physical condition of the device is generally good. However, since the functionality of the device’s electronic components and screen could not be tested, a clear assessment cannot be made in this regard.