Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 25.02.2026
Philips Respironics Trilogy Evo Mechanical Ventilator Analysis Report
Device Identification
The main unit examined in the visuals is a portable mechanical ventilator device. Along with the device, a patient breathing circuit, power cables, sensor packages, user manuals, and the original carrying/storage box are displayed.
Brand and Model
The logo located above the screen on the front face of the device and the model designation at the bottom of the screen are clearly legible. The data on the product’s original box and the accompanying user manuals also fully match the device.
- Brand: PHILIPS RESPIRONICS
- Model: Trilogy Evo
Originality Status
Considering the device casing, screen placement, logo print quality, the accompanying original “Philips Respironics” branded box, and specially printed booklets, the product has been determined to be 100% original. No evidence of aftermarket or replica parts was found.
Areas of Use
PHILIPS RESPIRONICS Trilogy Evo is a life-support mechanical ventilator suitable for use in hospital and home environments, providing invasive and non-invasive respiratory support. It is used in the treatment of pediatric (child) and adult patients suffering from chronic or acute respiratory failure. Thanks to its internal battery, it is suitable for mobilization.
Quantity and Inventory Information
The total inventory shown in the visuals is as follows:
- 1 Unit Philips Respironics Trilogy Evo ventilator main unit.
- 1 Unit Original Device Box (Cardboard).
- 1 Unit Patient Breathing Circuit (Hose set, attached to the device).
- 1 Unit Power Cable (Grey, wrapped on the side of the device).
- 1 Unit “Clinical Manual” (Clinical User Manual).
- 1 Unit “Home Caregiver Manual” (Home Caregiver Manual).
- 1 Unit Accessory Package in Yellow Envelope (External Flow Sensor).
- 2-3 units Blue Nitrile Gloves (attached/left on the breathing circuit).
General Condition and Cosmetic Examination
The exterior cosmetics of the device are in “New” or “Very lightly used display product” condition. No yellowing, stains, or wear from use were observed on the white plastic casing. Buttons and icons are not worn off. The device has a clean and sterile appearance.
Physical Deformation
There are no cracks, fractures, impact marks, or deep scratches on the main casing, front panel, or screen bezel. Corner joints are flawless.
Mechanical and Electronic Components
- Casing: Screw inlets and mounting lines are sturdy. No dust accumulation is seen in the side air vents, and filter covers are in place.
- Screen: There are no scratches or cracks on the touch screen surface. A pixel check could not be performed as the device was in the off position.
- Keypad: The “Alarm Mute” and “Power” buttons below the screen are physically intact.
Accessories and Connecting Elements
A transparent, corrugated patient breathing tube is attached to the right side of the device. The tube is clean, with no discoloration. The grey power/adapter cable is neatly coiled and secured with a yellow rubber band; this indicates that the cable is fresh out of its original packaging or has been carefully stored. It is understood from the label that an external part (flow sensor) used with the breathing circuit is inside the yellow envelope. Additionally, blue disposable gloves are seen stuffed into the hose outlet for hygiene or sealing purposes.
Label and Technical Data
The box and accessory label information read from the visuals are as follows:
- Device/Box REF Code: IN2100X15B (Read from the original box label).
- Yellow Package REF Code: 1132106 (The package contains the phrase “External Flow Sensor with Cable” and a reference number).
- Barcodes: The box has UD (Universal Device) barcodes and an area containing the serial number, but the full serial number cannot be read due to resolution.
Size and Compatibility
The device is in the compact and portable “portable” class. It is sized for standard bedside table use. It has a port structure compatible with adult and pediatric circuits.
Documents
Two different official manuals are provided with the product:
- Clinical Manual: A detailed technical and clinical setup guide for healthcare professionals.
- Home Caregiver Manual: A simplified care and usage guide for patient relatives/caregivers.
Both manuals are in new condition, with no signs of wear or folding.
Potential Malfunction Risk
Visual inspection revealed no findings on the device’s external structure, connection sockets, or cables (e.g., crushing, breakage) that could pose a risk of malfunction. The device is in factory-clean condition.
Final Assessment Note
The product is seen as a “complete set” with its accessories, original box, and literature files. It shows no signs of use and is in new or near-new (open-box) condition. Its physical integrity is complete.
