Secondhand Mindray uMEC 6 Patient Monitor

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 03.12.2025

Mindray uMEC6 Bedside Patient Monitor Analysis Report

Device Identification

The product in the image is a compact bedside patient monitor used in the medical field to instantly monitor patients’ vital functions (heart rhythm, oxygen saturation, blood pressure, etc.).

Brand and Model

On the front of the product, the brand logo is clearly visible and readable in the upper left corner, and the model name is in the upper right corner. Based on this data:

• Brand: Mindray
• Model: uMEC6

The brand and model information has been definitively identified from the inscriptions on the device itself.

Authenticity

Upon examining the device’s external casing, the font of the Mindray logo, the screen interface design, the structure of the membrane keypad, and the position of the “uMEC6” model inscription, the product appears to be an original Mindray production. The interface software graphics are perfectly consistent with original manufacturer standards.

Areas of Use

This device is suitable for use in the following areas:

• Hospital wards (inpatient services)
• Emergency departments and triage areas
• Operating theaters (as an entry-level or support monitor)
• Post-op (post-surgical) care units
• Outpatient clinics and medical centers

Quantity Information

The image shows 1 unit of the Mindray uMEC6 bedside patient monitor. Cables appear to be connected to the device from the left side, but the cable ends and sensors are not fully within the visual frame.

General Condition

Upon visual inspection, the device appears to be second-hand but clean and in working condition. The active screen, its ability to perform measurements, and the preserved whiteness of the outer casing indicate that the device is in good condition.

Physical Deformation

No visible deep scratches, cracks, breaks, or dents have been detected on the device casing, front panel, or frame. The plastic components retain their whiteness; no significant yellowing or discoloration is observed. The casing joints appear to be in order.

Mechanical Components

The vertically positioned keypad (membrane buttons) on the right side of the device and the navigation wheel (rotary knob) in the lower right corner appear to be intact. There is no sign of wear or fading on the buttons. The navigation wheel is in place.

Electronic Components and Screen Analysis

The device’s screen is operational, and its brightness is adequate. No significant signs of pixel defects or dead areas on the screen are visible. The data displayed on the screen includes:

• Date and Time: The information 2025-12-03 11:03:24 is located at the top of the screen, indicating that the system’s date/time battery and software are active.
• Patient Type: Set to “Adult” (“Erişk.”).
• ECG (Green Waveform): The heart rhythm trace appears fluid. The pulse rate is displayed as “61” in green.
• SpO2 (Blue Waveform): An oxygen saturation waveform is present. The saturation value is measured as “97%”, and the SpO2-derived pulse rate as “72”.
• NIBP (Blood Pressure): No measurement has been taken or completed in this section; values are “—/—” and a cross mark is visible.
• Language Support: The interface language is Turkish (expressions such as “Ameliyat” (Surgery), “ST KAPALI” (ST OFF), “Ana Menü” (Main Menu), “Alarm Ayarları” (Alarm Settings) are present).

Accessories

White patient connection cables (hose or cable harness) are visible emanating from the left side of the monitor. However, since the sensor ends of the cables (pulse oximeter probe, cuff, or ECG electrodes) are not in the image, a definitive comment cannot be made about whether these accessories are complete.

Battery Status

A battery icon is located in the lower left corner of the screen. Next to the battery indicator, a plug symbol is present, and the battery icon shows green fullness. This indicates that the device is currently connected to the power grid and its battery is being charged or is fully charged.

Label Information

No distinctive serial number or technical label, other than the brand and model, is visible on the front of the product. Typically, the technical labels for these devices are located on the rear casing.

Size and Compatibility

The Mindray uMEC6 model is from the compact series. Although a precise size cannot be determined from the image, this model typically has a screen size of approximately 10-12 inches. It is understood from the “Adult” (“Erişk.”) inscription on the screen that it has a software infrastructure suitable for use with adult, pediatric, and neonatal patient groups (with appropriate accessories).

Usage Duration

There is no counter on the screen displaying the device’s total operating hours.

Current Fault

Visual inspection did not reveal any fault warning, such as “Service Call,” that would prevent the device from operating. Active parameters are being read on the screen.

Potential Fault Risk

Although the device appears clean and well-maintained, the navigation wheel on the right panel is a mechanical part that can lose its sensitivity with prolonged use; however, it appears intact in the image. Currently, no serious risk factor based on visual evidence has been identified.