Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI agent. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 16.10.2026
Report code: 1792161289
Covidien Bedside SpO2 Patient Monitoring System Analysis Report
Device Identification and Brand Model Information
The main device analyzed is the Bedside SpO2 Patient Monitoring System, a bedside oxygen saturation monitor manufactured by Covidien. On the left side of the device, there is a black power cable used for external power connection and a gray patient connection cable with blue connectors at the ends.
General Condition
The device is used, but its overall physical condition is quite good. No fractures, cracks, or deep dents have been observed on the body. There are slight signs of use on the plastic outer casing and label surfaces.
Physical Deformation and Surface Condition
There is no structural deformation on the white and blue plastic surfaces of the casing. The keypad and the rotary adjustment knob are physically in place. No color fading or wear has been detected on the frame surrounding the display panel.
Mechanical and Electronic Components
The rotary control knob on the front panel is mechanically functional. The rear panel of the device houses the power input socket, fuse holder, equipotential connection terminal, and data communication ports. The power inputs and data sockets that enable the operation of electronic circuits are physically undamaged.
Accessories and Connection Points
The images show one black electrical power cable and one gray patient sensor connection cable. The port where the SpO2 sensor is attached is located on the lower front part of the device, while USB ports are on the side and an AC power input socket is on the rear. No cuts, crushing, or broken cables have been observed on the accessories.
Battery Status and Power Specifications
There is a plastic cover on the rear panel of the device that closes the battery compartment. The physical condition of the internal battery cannot be directly seen from the outside; however, the electrical values specified on the rear label indicate that the device is powered by mains electricity.
Label and Text Inventory
Technical labels and operating instructions are located on the top surface and rear panel of the device. The text on the rear label is as follows: Covidien, Bedside SpO2 Patient Monitoring System, Rx ONLY, IPX2, E528378, MEDICAL-PATIENT MONITOR ANSI/AAMI ES60601-1(2005) +AMD1 (2012), CAN/CSA-C22.2 No.60601-1(2014), POWER: 100-240V~ 50/60Hz 45VA, 2012 Covidien. Made in Korea, Covidien llc, 15 Hampshire Street, Mansfield, MA 02048 USA, Covidien Ireland Limited, IDA Business & Technology Park, Tullamore, Ireland, OGP 0004, 0123. The quick reference guide on the top surface includes the following terms: ON/OFF, SILENCE ALARM, AUDIO OFF, PULSE VOLUME, ALARM LIMITS, SATSECONDS, PATIENT MODE, AC Power, Battery Charge, Sensor Disconnect, Sensor Off. This data informs users about the device’s operating parameters, electrical voltage range, and safety standards.
Display Analysis
The device’s screen is currently off. On the right side of the display panel, there are fixed icon areas showing alarm and status symbols.
Dimensions and Compatibility
There is no direct information regarding the millimeter dimensions of the device on the labels; however, it is of a compact desktop size suitable for bedside use. The blue connectors on the ends of the gray cable and the port on the front panel ensure physical compatibility with compatible SpO2 sensors.
Year of Manufacture
The 2012 marking on the rear label indicates the year of manufacture of the device.
Documents and Usage Duration
There are no invoices, warranty certificates, or printed user manuals in the images. Since the screen is off, no numerical data regarding the total operating hours or usage duration of the device can be read.
Existing Faults and Potential Risks
There is no evidence of any existing faults in the images, such as broken parts, error messages on the screen, or broken cables. Due to the good general condition of the device, there is no observed serious wear or potential risk of failure.
Authenticity Assessment
When the label quality, logo placement, body craftsmanship, and material structure are examined, it is evident that the product is an original Covidien brand device.
Usage Areas
This device is suitable for use in hospitals, clinics, and emergency service environments for bedside monitoring to continuously track patients’ oxygen saturation levels (SpO2) and pulse rate.
Quantity Information
There are a total of three main parts in the images: one main bedside monitor device, one electrical power cable, and one patient connection cable.
